F Link Jablotron

F Link Jablotron Rating: 3,9/5 3504 votes

A part of the F-Link program (Devices window, at the keypad position – Internal settings). Note: To comply with the EN 50131-3 norm it is necessary to fix the.

  1. Jablotron F Link
  2. F-link Jablotron Manual
Jablotron
The JA-114E Bus access module with LCD, keypad and RFID
The keypad is a component of the JABLOTRON JA-100 system. Its
modular architecture enables users to create a combination whose size
of installation perfectly meets their needs. The device should be
installed by a trained technician with a valid certificate issued by
The keypad comprises a display, an RFID card / chip reader and the
first control segment (1). JA-192E segments can be used to extend the
JA-114E unit by the required number of segments (the max. allowed
amount is 20 on one unit). The tilting keypad cover (6) can be removed
Figure: 1 – control segment; 2 – segment buttons; 3 – backlit activation
button; 4 – LCD; 5 – keypad module with RFID; 6 – tabs for opening;
Figure: 8 – control segment connector; 9 – production code;
Installation
Gradually press the four tabs (6) on the sides and release the
When installing more control segments, first remove the socket
st
segment.
3. Remove the plastic windows from the segments (by levering on
4.
Always connect the segment wires to the connector of the previous
segment and click them into each other (we recommend coiling the
F Link Jablotron
wires by turning the segment by 360° – this will prevent any
possible damage to the wires between the plastic parts). Use this
method to install all the required control segments. Finally, push the
Push the cable through the plastic base and attach it to the
selected place together with the segments using screws. If
multiple control segments are required, attach them onto the wall
using screws as well (use the number of screws required).
Connect the bus cable to the bus terminals (10).
always switch the power off.
7. Connect the segment wires to the internal connector of the keypad
8. Insert the keypad into the base.
9. Proceed according to the control panel installation manual. Basic
When the device is switched on, the yellow LED starts flashing
repeatedly to indicate that the keypad has not been enrolled
The JA-114E Bus access module with LCD, keypad and RFID
b. Go to the F-Link program, select the required position in the
Devices window and launch the enrollment mode by clicking
Press the backlit activation button (3) above the screen – the
keypad is thus enrolled and the yellow LED indicator goes off.
When you have completed the installation, insert descriptive labels
onto the segment plastic windows and close them. Label printing is
a part of the F-Link program (Devices window, at the keypad
Note: To comply with the EN 50131-3 norm it is necessary to fix the
cover tab by the screws from the accessories. In picture no 1 the
Figure: Inserting a label into a control segment
Go to the Devices window in the F-Link program. When you are at
the keypad position, use the Internal settings option. The particular
unit is displayed and it is possible to set its properties. It is possible to
set the required functions for individual segments (control of sections,
section status signalling, alarm triggering, PG output control, PG output
status signalling, etc.). More details are available in the F-Link program.
A common segment (up to 2 of them allowed on one keyboard) simulates
the simultaneous pressing of several segments which are placed on this
keyboard and which control sections. The selection of sections which are
assigned to the common segment is performed by F-Link SW, the Devices
window. At the keyboard position select Internal settings / and Common
segment 1 (2) and mark the segments which will be operated en bloc. The
selected sections will be set / unset after pressing a button on the common
segment. If the states of the segments which are operated by the common
segment are mixed, then only the segments that need changing will be set /
unset. If partial setting is enabled for some segments, then the common
segment respects this: 1 st. press = partially setting, 2
is not suitable to combine a common segment with a common section
The indication of the common segment is: all segments set = green, some
set (partially set) = yellow, all sections fully set = red.
If you need to change the unit's individual segments, it is possible to
separate them by levering the corresponding separating gaps from one
nd
MLU51105

Advertisement

Related Manuals for jablotron JA-114E

  • Keypad JABLOTRON JA-100 User Manual
    (8 pages)

Summary of Contents for jablotron JA-114E

  • Page 1 (1). JA-192E segments can be used to extend the onto the segment plastic windows and close them. Label printing is JA-114E unit by the required number of segments (the max. allowed a part of the F-Link program (Devices window, at the keypad position –...

  • Page 2: Technical Specifications

    Can be operated according to ERC REC 70-03 JABLOTRON ALARMS a.s. hereby declares that the JA-114E module is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The original of the conformity assessment can be found www.jablotron.com...

If approved it will be the third biggest tech merger in history, according to business news site CNBC. Red Hat said it was the biggest involving a software company. The deal will see IBM acquire all of the issued and outstanding common shares of Red Hat for $190.00 per share in cash, more than $70 above the $116.68 at which Red Hat was trading on close of business Friday. 'The acquisition of Red Hat is a game-changer. It changes everything about the cloud market,' said Ginni Rometty, IBM's chairman, president and CEO. 'IBM will become the world's number one hybrid cloud provider, offering companies the only open cloud solution that will unlock the full value of the cloud for their businesses.' Cloud computing refers to the delivery of computing services, including storage and software, over the internet to achieve economies of scale. Hybrid cloud relates to the linking of public and private cloud platforms. IBM's Rometty added that most companies are currently being held back in their … [Read more...] about IBM buys software company Red Hat for $34bn in bid for cloud dominance

Posted :